1.18 Citroen Familiale

General discussions relating to all model brands and scales.
Post Reply
lampwick
Posts: 3
Joined: Mon Dec 10, 2018 9:14 am

1.18 Citroen Familiale

Post by lampwick » Mon Dec 10, 2018 9:19 am

Hi all. First post is a question. Does anyone know if there has been a 1.18 scale Citroen Familiale made by any maker? I have most of the Citron 15cv TA models extant but this one has always eluded me. Most obliged for any help.

User avatar
[KRAFTIG]
.
.
Posts: 32623
Joined: Sun Jun 17, 2012 9:08 am
Location: Canada
Contact:

Re: 1.18 Citroen Familiale

Post by [KRAFTIG] » Mon Dec 10, 2018 10:01 am

Hi, welcome. I'm not sure. If it was done check with OttOmobile or Norev, Norev seems to allocate some of their assortment to this brand often.

lampwick
Posts: 3
Joined: Mon Dec 10, 2018 9:14 am

Re: 1.18 Citroen Familiale

Post by lampwick » Mon Dec 10, 2018 10:12 am

Thanks for your swift reply. I have tried those sites before but only found them in 1:43, much too small for me I'm afraid.

User avatar
[KRAFTIG]
.
.
Posts: 32623
Joined: Sun Jun 17, 2012 9:08 am
Location: Canada
Contact:

Re: 1.18 Citroen Familiale

Post by [KRAFTIG] » Mon Dec 10, 2018 10:34 am

Email OttOmobile, see if its on the future list of "to be made" models. Good Luck!

lampwick
Posts: 3
Joined: Mon Dec 10, 2018 9:14 am

Re: 1.18 Citroen Familiale

Post by lampwick » Mon Dec 10, 2018 2:17 pm

They can't answer due to their volume of e-mails apparently. I had a look at their Citroen CX 25 TRD Turbo 2 but it seems to be made of resin with no openable parts. Seems a lot of money for a shiny ornament.

User avatar
[KRAFTIG]
.
.
Posts: 32623
Joined: Sun Jun 17, 2012 9:08 am
Location: Canada
Contact:

Re: 1.18 Citroen Familiale

Post by [KRAFTIG] » Mon Dec 10, 2018 6:07 pm

lampwick wrote:They can't answer due to their volume of e-mails apparently. I had a look at their Citroen CX 25 TRD Turbo 2 but it seems to be made of resin with no openable parts. Seems a lot of money for a shiny ornament.
OttOmobile is sealed-resin. Have an example in scale is better than nothing. And based on the car chances are it won't make it into diecast with opening bits.

Post Reply

Return to “General Discussion”